STEINEL S-Former E, Assembly Instructions Manual, Page: 8 / 92

8 Assembly instructions Version 12.2022
1 Introduction
1.4 Warranty and liability
For the use of the S-Former E, our “General Terms and Conditions” always apply.
The “General Terms and Conditions” are accessible via our homepage.
Warranty or liability claims in case of damage to persons or property are precluded if they were the result
of one or several of the following causes in particular:
ƒ non-intended use of the S-Former E
ƒ improper assembly, commissioning, operation, maintenance and inspection of the S-Former E
ƒ operating the S-Former E with defective safety equipment or protective devices that were not
installed properly or protective devices and/or safety equipment that does not work.
ƒ non-observance of the notices contained in these assembly instructions regarding safety, putting
into service, operation, setting, maintenance and inspection of the S-Former E
ƒ unauthorised structural alterations of the S-Former E
ƒ insufficient monitoring and maintenance of parts that are subject to wear.
ƒ improperly performed repairs
ƒ disaster situations caused by external elements or force majeure
In order to maintain functional reliability, only original spare parts from the manufacturer may be used.