STEINEL S-Former E, Assembly Instructions Manual, Page: 56 / 92

56 Assembly instructions Version 12.2022
10 Maintenance, repair
10.8 Maintenance work on the S-Former E3
10.8.1 Cleaning
1
Cover
2
4x socket-head screws M5x10
1. Loosen the four M5x10 socket-head screws and
disassemble the cover.
1
Front assembly group
2
4x socket-head screws M6x25
3
4x hexagon head screws M6x20
4
Housing
5
Rear assembly group
2. In order to disassemble the rear assembly group,
loosen the four M6x20 hexagon head screws.
3. In order to disassemble the front assembly group
with a cylinder and spline shaft, loosen the four
M6x25 socket-head screws.
1
Splined hub
2
Toothed belt
3
Housing
4. Clean the housing, toothed belt and output hub.
Remove any foreign objects, wear, dirt particles,
oil, grease and other residues.
1
Cylinder
2
Spline shaft
5. Clean the spline shaft and check it for wear and
damage.
6. Reassemble the assembly groups in reverse order.
1
2
1
2
3
4
5
1
2
3
1
2