34
Assembly instructions
Version 12.2022
9.1 Safety instructions
WARNING
Before carrying out any work, disconnect the S-Former E from the elec-
trical and pneumatic power supply. Relieve the pressure accumulator.
9.2 S-Former E0
9.2.1
Changing the tool
1
Spindle
2
Open-end spanner
SW10
3
Clamping nut
4
Tool
5
Hook wrench
1. Pull out the spindle
1
by hand.
2. Loosen the clamping nut by approx. 1 revolution
3
using the hook wrench
5
and fix the spindle
1
using an SW10 open-end spanner
2
.
3. Pull the tool
4
out of the collet by hand.
4. Insert the new tool into the collet by hand.
5. Slightly twist the tool until its square end locks into that of the collet or spindle.
6. Retighten the clamping nut
3
.
9.2.2
Changing the tool size
1
Spindle
2
Collet
3
Clamping nut
4
Tool
5
Collet, groove
6
Clamping nut,
formation
7
Collet, square end
In order for the tool size to be changed, the collet
2
must first be adjusted.
1
5
2
3
4
5
7
6
1
2
3
4
9
Tool change
Summary of Contents for S-Former E
Page 1: ...Assembly instructions for S Former E ...
Page 91: ......
