STEINEL S-Former E, Assembly Instructions Manual, Page: 13 / 92

Version 12.2022 Assembly instructions 13
2 Safety
Intended use also includes:
ƒ observing all notices in the assembly instructions
ƒ adhering to and monitoring the mechanical, thermal and electrical limits as well as limiting or
switching off when the limits have been either reached or exceeded,
ƒ adhering to inspection and maintenance cycles,
ƒ assigning only qualified and authorised professionals and operators to the respective tasks,
ƒ the exclusive use of original parts.
2.3 Foreseeable misuse
ƒ Operating the S-Former E beyond the defined mechanical and electrical limits
ƒ Powering the S-Former E with a type of drive that is different from the one defined
ƒ Operating the AC Servodrive with an unsuitable drive control unit
ƒ Operating the AC Servodrive without software limit monitoring (torque, rotation speed, temperature)
ƒ Unauthorised modifications or changes to the cylinder, gear, motor
ƒ Operating the S-Former E without attachment/installation on a holding device or in a tool
ƒ Operating the S-Former E without the required protective device to prevent access to moving parts
ƒ Operating the S-Former E in the immediate vicinity of magnetic fields or magnetised parts
ƒ Operating the S-Former E in explosive environments
Electrical and mechanical limits can be found in the

MA, 12 Technical data
2.4 Owner obligations
The owner commits to only allow persons to work with the S-Former E who
ƒ
are familiar with the basic regulations concerning occupational safety and accident prevention,
ƒ
have been fully instructed in working with the S-Former E,
ƒ
have read and understood these assembly instructions.
The owner also commits to complying with the EC directive for the use of work equipment 2007/30/EC
as well as the pertinent national regulations.
2.5 Obligations of the personnel
Prior to beginning work, all personnel tasked with working at the S-Former E are obligated to
ƒ
observe the basic regulations concerning occupational safety and accident prevention.
ƒ
read and observe the safety instructions and warning notices in these assembly instructions.