6
STEINDORFF
®
Fig.7
④
Fig.6
①
③
②
7
Fig.4
⑩
Fig.5
2.2.2.
Mounting binocular head (Fig. 3)
Loose the clamping bolt
⑦
on the pillar
⑥
and insert
the binocular head and zoom body assembly
⑧
into the
bracket of the pillar, then screw down the bolt
⑦
.
2.2.3.
Mounting eyepieces (Fig. 3, Fig. 4, Fig. 5)
1.
Remove the eyepiece dust caps
⑨
and gently insert
two adjustable eyepieces
⑩
into the eyepiece
sleeves until they stops, as in Fig.4.
2.
Using the Eye Shades
When Wearing Eyeglasses:
Use with eye shades in their normal folded-down
position. This will prevent eyeglasses from being
scratched by the eyepiece as in Fig 5.
When Not Wearing Eyeglasses:
Extend the folded eyeshades. This makes
observation easier by preventing the inverse
incidence of light from between the eyepiece and
your eyes.
2.2.4.
Connecting the power cord (Fig. 6)
1.
Turn the main switch
①
on “O” (off) state before
connecting the power cord.
2.
Insert the power plug
②
into the power jack of the
microscope; make sure the connection is well.
3.
Plug the power cord
③
into the power supply
receptacle safely. Make sure the connection is well.
2.2.5.
Mounting glass stage plate (Fig. 7)
If necessary, the original plastic stage plate can be
replaced by a glass one.
Both top and bottom illuminators are LEDS.
Permitted power supply voltage: 100V
～
240V.
