Steinbach HJ1103, Original Owner'S Manual

Page: 24 / 185

Check the following before each use:
- Is there visible damage on the device?
- Is there visible damage on the control elements?
- Do all individual parts function?
- Are the accessories in perfect condition?
- Are all cables in perfect condition?
Do not start up a damaged device or damaged accessories. Have them checked by the manufacturer or
its customer service or a qualified service technician.
Cleaning the pool
Observe the following before cleaning your pool:
- Remove any cover or foil from the pool.
- Remove obstacles (such as a ladder) from the pool.
- Switch off the filter system at least one hour before the start of cleaning so that particles in the
water can settle on the floor.
Proceed as follows to clean your pool:
1. Insert the filter unit.
2. Place the device in the pool and switch it on.
Inserting the filter unit
6
3
4
7
2
4
1. Insert the filter unit
3
into the bottom part
4
.
2. Push the top part
2
onto the bottom part
4
until it has snapped into place on both sides.
The filter unit is inserted.
Placing the device in the pool and starting cleaning
8
1
11
9
9
8
12
1. Attach the protective cap
1
to the charging plug
11
.
2. Set the rotary switch
8
to ON.
The status indicator
12
is lit blue. The device is switched on and ready for operation.
24