Steinbach Flexible 049010, Original Owner'S Manual, Page: 17 / 128

shower head should point downwards. If screw connections are not water-tight, wrap the thread in
Teflon tape.
To assemble the solar shower, proceed as follows:
2
9
1
3
7
4
3
2
1
1. Screw the shower head
9
including the seal onto the tank top part
1
.
2. Place the seal
4
in the tank bottom part
7
.
3. Slide the towel holder
2
and the threaded ring
3
onto the tank top part
1
.
4
7
3
2
1
5
5
4. Place the tank top part
1
onto the tank bottom part
7
.
5. Slide the threaded ring
3
onto the connecting point and screw the top part and the bottom part
together with the threaded ring.
6. Slide the towel holder
2
over the threaded ring
3
.
7. Screw the hose adapter
5
onto the hose connection.
The solar shower is assembled.
Filling the tank
To fill the tank
7
of your solar shower, proceed as follows:
1. Connect a garden hose to the hose adapter
5
and the faucet of the water pipe. Position the
garden hose so that no one can trip over it.
2. Turn on the water supply faucet. Turn the faucet
8
all the way to the "hot" position and open it. In
this position, the tank fills fastest. Water flows into the tank. It takes approx. 3 minutes for the tank
to fill.
3. As soon as water runs consistently out of the shower head
9
, close the shower faucet.
4. Turn off the faucet of the water pipe.
The tank is filled.
17
en