14
Dial-up 5 &6 , OFF-ON: 30S
Note:
1.When the motor is running, the motor will stop immediately if triggers pedestrian mode
2.After triggering the pedestrian mode to open the gate for 6s, no mater it enter the countdown to close the
gate or stop status, If trigger again, the gate will close the gate immediately.
E. Dial-up 7: Condominium mode setting
OFF
：
Condominium mode disabled(factory setting)
ON: Condominium mode activated
When the gate is opening, trigger remote control and the start interface are invalid until the door is opened.
When the gate is closing, trigger remote control and the start interface , the gate will stop to close and auto
open until the opening limit is reached (the remote control and the start interface are invalid when the gate is
opening).
7.5 Motor Start Capacitors:
Capacitors are connected with control board before use motor, please confirmed the interface of capacitors is
secure. Please see picture Fig 14
7.6 Limited switch options (J1):
Limit switch is used to switch terminal stop detection interface, that direction of open and close the gate
7.7 Terminal stop detection interface:
Terminal for limit switch, such as spring limit or magnetic limit .
7.8 Power switch:
Switch on /off power stop when do some setting on the control board