Torch Runner (HS)
Torch Runner (HS) Operator’s Manual
25
5.11.2. Narrow magnetic unit
Allows clamping the track to ferromagnetic surfaces.
The
holding
force
on
a
5
mm
(0.2
’’)
thick
surface
is
750
N up
to
a
temperature
of
100°C
(212°F). At 180°C (356°F)
the force decreases to 450 N.
Install the unit in the same way as the magnetic unit is installed. To clamp the unit to
the surface, use the 17 mm flat wrench (not included) and rotate the side screw to ON.
5.12. Vacuum track system
Dedicated to fixing the track to non-ferromagnetic surfaces.
Part number:
PDS-0582-10-00-02-0
Part number (vacuum pump with safety reservoir):
AGR-0541-24-10-00-0 (115 V US)
AGR-0541-24-20-00-0 (230 V CEE)
Other parts of the system are described in a separate manual.
