Torch Runner (HS)
Torch Runner (HS) Operator’s Manual
15
5.2. 1000 mm
(39’’) rack
Increases the reach of the torch holder.
To remove the installed rack, use the 3 mm hex wrench to loosen the set screw and
remove the counterweight. Then, loosen the handle of the torch holder and remove
the holder. Next, unlock two rack locking levers and rotate the rack position knob to
move the rack out
of
the
carriage
body.
Install
in
reverse
order.
Position
the
rack
teeth
sideways to engage them with the gear of the knob.
Note that using the 1000
mm (39’’)
rack
may
also
require
the
roller
support or 2.6 kg counterweight to balance the carriage.
Part number:
RAM-0475-23-00-00-0
