08
07
2.7 Photo taking
2.8 Auto brightness
2.9 Intelligent sleeping mode
2.11 Recording while Parked
2.12 Time lapse while parked
2.10 Camera switching
Touch the screen, then press “ ” icon to take the photo.
Note: The JPG file can be founded in the File Playback (Please refer to page 08).
The recorder can adjust the brightness based on the light conditions.
When ACC OFF, the recorder will enter the intelligent sleeping mode.
Notes: The screen is always closed during the recording unless press “ “ button by manual.
Notes: The screen is always closed during the recording unless press “ “ button by manual.
In setting page, select Parking Mode and confirm it is not turned OFF. When the vehicle is parked, if
an event happens, such as sudden impact or accident crash, the recorder will turn on and recoding
automatically. The video from the moment will save in 1 minute. Finally, the recorder will enter the
intelligent sleeping mode after the recording finished.
In setting page, select Time Lapse and confirm it is not turned OFF. When the vehicle is parked, the
video will start to record an video for 8/12/24 hours with 1 fps.
Touch the screen, then press “ ” icon to switch the front or rear camera .
The switch sequence as follows:
Front camera → Rear camera → Front and rear camera displayed in one screen
2.13 File playback
Touch the screen, then press “ ” icon to select a photo or video for playback:
Notes:
If the recording is in progress, press “ ” button to stop recording first.
If there is no operation within 30 seconds, the system will back to the Main interface.
Photo
Loop recording
Emergency recording