5. Remove the red
and black clamps
from the car battery
3. Start the vehicle
4. Disconnect the
blue end of the
battery clip
- 2 -
Charging the vehicle:
1.
Press the power button to switch on the jump starter, and check the power
level on the screen is 51% or higher.
Then charging the vehicle according to the following steps:
1. Connect the red
clamp to “+” of
car battery, black
clamp to “-” of
car battery
2. Plug the blue end
of the battery clip
into the Jump start
output port
How to operate
Jump Starter
JS12
User Manual
Note:
● Some car models may not start successfully for the first time and thus enter the
protection state. In this case, please try to keep pressing the car start button for
about 10 seconds and release it when the engine runs.
● The jump starter will be switched off automatically if there is no operation within
20 seconds.
- 1 -
Brief Look
Power button
Type C input
port
USB A output
port 1
Jump start
output port
LCD screen
LED light
USB A output
port 2
Includes: Jump starter x1, USB type C cable x1, Battery clip x1,
Storage bag x1, Manual x1
PTI0046R/B
