Maintenance
_______________________________________________________________
134917
11
6
Maintenance
6.1
Safety instructions
CAUTION
Damage to product
Damage to the product is possible
whenever servicing or repair tasks are
carried out incorrectly.
Have only qualified personnel
complete such tasks.
Only use suitable tools for these
acitivities!
6.2
Function check
The components of the
Universal Lockers
product should be checked for correct functioning
at regular intervals.
Inte
rval
Inspection
point
Function
check
Required
condition
Action
(if
necessary
)
Regu-
larly
Fastening
elements of
the Universal
Lockers
product
Position,
attachment
and
condition of
fastening
elements
The
fastening
elements of
the
Universal
Lockers
product are
correctly
tightened
and not
damaged.
Tighten
screws/bol
ts; replace
defective
fastening
elements
-||-
Fastening
elements of
accessories
Position and
attachment
Accessories
assembled
properly as
described in
installation
instructions
Remove
accessory,
correct
accessory
position,
fasten
accessory
Table 6-1: Function check
6.3
Maintenance
Only authorised and qualified personnel may carry
out maintenance work. Please contact our
Customer Service Department in this regard (see
8
Repairs and spare parts).
Risk of injury and damage.
The fastening screws may tear if the
assembled Universal Lockers product is
lifted.
Exercise due caution when transporting
or moving the Universal Lockers
product.
CAUTION
Using unapproved spare parts may
cause damage to the product.
Only components provided by Steelcase
may be used as spare parts. Coordinate
the installation of differing parts with
Steelcase.
Comply with the stated
maintenance and inspection
intervals.
6.3.1
Exclusion of liability
Steelcase assumes no liability or warranty in the
following cases (see
Liability on page 2):
■
Inadequate monitoring of the product
components (function checks)
■
Improper maintenance
■
Maintenance by third parties
■
Maintenance by unqualified and unauthorised
personnel
■
Use of components and adaptations that do not
originate from Steelcase
■
Unauthorised changes to the product with
regard to its construction and design
■
Intentional misuse
■
Improper use (see
1.1 Intended use)
