Product description
Migration Manual -en- 2019
Page 10 of 35
Product description
Technical data
Desk
Migration / Migration H Bench
Dimensions
See delivery note
Weight
See delivery note
Electrical components
Controller and drive
Temperature range at the setup location:
+5 °C bis +35 °C
Relative humidity:
5 % to 80 % (non-condensing)
Rated voltage:
220 - 240 V AC~
Rated current
2 A
Rated frequency:
50 to 60 Hz
Maximum load capacity:
50 kg
Maximum duty cycle:
2 min
ON
/ 18 min
OFF
Maximum power consumption during lifting:
-
2 telescopic columns per desk
240 W
Power consumption in standby mode:
≤ 0.1 W
Maximum adjustment range:
-
Single telescope, Lift 1
720 mm to 1200 mm
-
Double telescope, Lift 2, (Lift 3)
650 mm to 1250 mm, (620mm to 1280 mm)
Up/Down
control panel:
Standard
Memory
control panel:
optional
Noise emission:
< 60 dB(A)
Type plates are located on the controller housing, on the columns and under the desktop.
Factory setting on delivery
The desk reference height on delivery is:
•
Lift 1 variant: 720 mm
•
Lift 2 variant: 650 mm
•
Lift 3 variant (special lift): 620 mm
With the telescopic, crank and lift versions, you can change these settings according to your
requirements. The corresponding descriptions are available under Operation and settings.
