Steelcase Garland Round Table Top with a Disk Base Installation Download Page 1

Page: 1 / 5

Page 1 of 5

Y9501757 Rev. M

If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at

(888.783.3522)

for immediate action by people who want to help you.

888.STEELCASE

(Outside the U.S.A. Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com

Printed in the U.S.A.

Garland - Table Base Installation and Two-Piece Top Assembly

Power Driver
with Phillips tip

1/8" Drill Bit

1/2" Wrench

Level

Before discarding packaging, please
ensure that all parts are included.
For Round Task Tables, please see
exploded view of assembly on page 2.

Round Table Top with a

Disk Base

Two-Piece Rectangular Top

with Panel Bases

IMPORTANT!

3/32” Allen

Wrench

Punch

- or-

Summary of Contents for Garland Round Table Top with a Disk Base

Page 2: ...tion Determine if you want the mousehole in the up or down position then assemble base as shown Page 2 of 5 Y9501757 Rev M 1 Mousehole may be positioned for wire management top must have a port Or for no exposed detail DOWN UP ...

Page 3: ... base assembly Page 3 of 5 Y9501757 Rev M 2 3 NOTE If using a rectangular or square top make sure base is mounted in a diagonal orientation see above to top The drawing below shows the incorrect positioning of the base with top 3 screws per leg Locate base with 1 pilot hole per leg 3 ...

Page 4: ... 1 2 12 7mm deep Install 12 screws Repeat procedure for other base assembly Install support bracket with 5 7 8 screws as shown Align dowels with holes in top panel Support Bracket Mounting Bracket Panel Base Installation Page 4 of 5 Y9501757 Rev M 1 2 3 4 5 1 4 3 Dowels 12 screws ...

Page 5: ... M 1 2 3 4 5 Install splines into groove in one end of top section 3 Slide top halves together Install 4 joint fasteners Tighten joint fasteners with punch or similar tool as shown Refer to preceding page to install base assemblies 2 1 3 5 Splines 4 ...