background image

Currency

®

 Single Pedestal Desk

Page 1 of 4

939500298 Rev D

Components

Letter  Description

Full End Panel

T

Top

I

Modesty Panel

NOTE: 

Assemble as close to

assembled units final desired 
location to avoid moving a heavy 
unit.

1. 

Remove the drawers from the 

pedestal as shown on page 3.

2. 

Remove shipping strap from 

pedestal.

3. 

Lower the pedestal onto the 

underside of T (top). Make sure pins 
engage into cams. 

2

T

3

If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at

888.STEELCASE

 (888.783.3522)

for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico, 
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com

©

 

2012 Steelcase Inc. 

Grand Rapids, MI 49501 
U.S.A.  
Printed in U.S.A.

®

Summary of Contents for Currency Single Pedestal Desk

Page 1: ...Remove shipping strap from pedestal 3 Lower the pedestal onto the underside of T top Make sure pins engage into cams 2 T 3 If you have a problem question or request call your local dealer or Steelcase Line 1 at 888 STEELCASE 888 783 3522 for immediate action by people who want to help you Outside the U S A Canada Mexico Puerto Rico and the U S Virgin Islands call 1 616 247 2500 Or visit our websit...

Page 2: ...er adjust six 6 glides and level unit 6 Reinstall drawers Page 2 of 4 939500298 Rev D T 4 E I TURN CLOCKWISE Fasten Cam Locks in 9 places The cam lock screw needs to be turned 3 4 full turn or 270 o clockwise for complete engagement Fasten Cam Locks in 7 places The cam lock screw needs to be turned 3 4 full turn or 270o clockwise for complete engagement TURN CLOCKWISE Fasten Cam Locks in 6 places ...

Page 3: ...on Remove two 2 or four 4 screws that hold the drawer front to the drawer body Alignment is done simply by loosening the screw and retightening when alignment has been made Pull the box or file drawer out until it stops Press down on the lock catch on each side of drawer and pull out on the drawer as shown Apply stickers on all visible cam joint faces to cover the connector faces after assembly Ad...

Page 4: ...set and needs to be installed on the shorter offset side If the screw heads are not visible turn the panel shelf 180o Shorter off set side NOTE When assembly has been completed make sure to remove all of the E B I ect stickers from the surfaces of all the parts Fasten Cam Locks The cam lock screw needs to be turned 3 4 full turn or 270o clockwise for complete engagement WRONG WRONG TURN CLOCKWISE ...

Reviews: