Installation Instructions 21078501 Rev C
Tools required:
Page 1 of 2
#2 Phillips
Power Drill
7/16"
1
Vertical Processor Sling, Fixed Mount
Compatible with c:scape and Frameone worksurfaces
CPRSLFO
V
ertical Processor Sling
| Installation Instructions
Place base bracket on underside
of worksurface with slot towards
the rear of the desk and base
bracket no more than 1/4" from
the cantilever to allow maximum
clearance between CPU and desk
leg. Install with four (4) 5/8" long
screws (included).
Insert one (1) bolt through sling
support bracket and loosely install
the nut on the opposite side.
Thread straps through sling
support bracket and place
assembly onto the CPU.
SCREW
BASE
BRACKET
SLOT
Setback the base bracket, as shown,
to allow the CPU to be flush with the
front edge of the worksurface.
For example: Setback 6-3/4" when
using an 18" deep CPU.
2
3
BOLT
NUT
STRAP
2
3
CANTILEVER
1
