Steel City 55230, User Manual

Page: 17 / 36

17
EXTENSION TABLE
MAKE CERTAIN THE MACHINE IS DISCONNECTED
FROM THE POWER SOURCE.
WARNING
!
NOTE:
The motor drum guard must be moved to the
side or removed completely to install the extension
table.
1. Mount the Extension table mounting bracket (H) to
the right side of the motor using Two Soc Hd Scrs
(J).
SEE FIG. 4 .
2. Insert the shaft of the extension table (K) into the
mounting bracket (H).
3. Install the lock knob (L) and tighten to hold the
extension table (K) in place.
NOTE: Make certain to maintain the gap between the
motor drum and the extension table to prevent the belt
from contacting the table.
Fig. 4
L
J
J
H
K
BELT TENSIONING HANDLE
MAKE CERTAIN THE MACHINE IS DISCONNECTED
FROM THE POWER SOURCE.
WARNING
!
1. Using a rubber mallet tap the handle (M) onto the
belt tensioning shaft (N).
SEE FIG. 5.
Fig. 5
N
M