background image

4

742.114 | 14.50

EN

Proper usage 

The temperature differential controller, subsequently referred to as the 

controller

, is an 

independently installed electronic temperature controller for on-surface installation. 

Integration into a pump assembly is possible when the technical specifications of the 

controller are adhered to.

The maintenance-free controller is exclusively intended for controlling solar energy and 

heating systems.

About these instructions

3.1 

Contents

This manual contains all information required by a technical professional for setting up 

and operating the temperature differential controller. 

3.2 

Target audience

The target audience of this manual are technical professionals who:

•  have the knowledge of terminology and the skills necessary for setting up and oper-

ating solar energy systems. 

•  have the necessary training, knowledge and experience, and knowledge of the ap-

plicable regulations in order to evaluate and recognise the dangers inherent in the 

following work:

–  Installation of electrical equipment

–  Production and connection of data communication cables

–  Production and connection of mains grid power supply cables

3.3 

Danger levels in warning notices 

Évaluation du niveau de risque dans les avertissements

Danger level

Niveau de risque

Likelihood of occurrence

Éventualité de l’intervention

Consequences resulting from non-compliance

Conséquences en cas de non-respect

  Danger 

Danger

Imminent threat of danger

Danger imminent

Death, serious bodily injury

Mort, lésions corporelles graves

  Warning 

Avertissement

Possible threat of danger

Danger éventuel

Death, serious bodily injury

Mort, lésions corporelles graves

  Caution 

Attention

Possible threat of danger

Danger éventuel

Minor bodily injury

Lésions corporelles simples

 

Notice 

Avis

Possible threat of danger

Danger éventuel

Property damage

Dommages matériels

Summary of Contents for TR A502 TT

























































Reviews: