2
3
4
5
QUICK START GUIDE
Make your safety a priority
Connect hose into the Saphira by
opening the protective flap located
on the front of the machine (ii.)
Push the plug end of the hose in,
with the round red button on the
top side of the hose, until it clicks.
PREPARING THE SAPHIRA C8
Plug cable into a wall outlet.
NOTE: Avoid using multi-outlet
power-boards
and
low-quality
extension cables.
1
Open filler cap (i.). Fill tank with
filtered or clean tap water. Close cap.
NOTE: Do not use demineralised
water. Do not add chemical.
Turn on Saphira using the black
ON/OFF switch (iii.).
Wait
until
machine
reaches
temperature. The green ‘Steam
Ready’ (iv.) LED will light up on the
display, indicating the Saphira is
ready to use.
i.
iii.
ii.
iv.
DISPLAY PANEL
NOTE: The continuous steam capability allows for water
reservoir re-filling at any time during operation. When alarm
sounds, you can refill the water as required.
WARNING: Servicing boiler nut on underside of machine will
remain HOT after machine is switched off.
1300 79 50 50
www.steamaustralia.com.au
WARNING: Please ensure steam
handle is switched OFF before
plugging into machine.
The green light (iv.) indicates when machine is ready to use.
The yellow light (v.) indicates when the water reservoir is
empty. Alarm will sound, and steam output will cease.
The Saphira is a simplified unit with two indicators.
Follow step 2, 'Preparing the Saphira C8' to refill reservoir.
v.
