I N S T A L L A T I O N G U I D E
for the
SB-T-TACCAB/10W3v3
SKU# 94307 - 94308
2005 - Up Toyota Tacoma Access Cab
Thank you for choosing a JL Audio Stealthbox
®
for your automotive sound system. With proper installation, your new
vehicle-specific enclosed subwoofer system will deliver years of listening pleasure.
We strongly recommend that you have your new Stealthbox
®
installed by your authorized JL Audio dealer. The
installation professionals employed by your dealer have the necessary tools and experience to disassemble and
reassemble your vehicle properly. Also, keep in mind that your warranty coverage extends to 2 years if your system is
installed or approved by your authorized JL Audio dealer. If you prefer to perform your own installation, please read
this installation guide completely before beginning the process.
If you choose to perform the installation yourself, it is absolutely vital that
the Stealthbox
®
be properly mounted to the vehicle according to these
instructions. Failure to mount the enclosure properly presents two problems:
1) The sub-bass performance will suffer due to the movement of the enclosure
caused by the force exerted by the woofer(s).
2) A loose enclosure presents a serious safety hazard in the event of a collision
or sudden deceleration.
S T E P 1
Remove the cup holders from the console.
Remove the pair of screws that are exposed.
Continued on Next Page
S T E P 2
Remove the pair of screws that are at the bottom of the
storage bucket.
Remove the console out of the truck.
S T E P 3
Remove the three bolts located on the transmission tunnel
that secures the mounting bracket for the AC power inverter.
(If equipped with the AC power inverter)
Unplug the wiring harness from the AC power inverter and
remove out of truck.
If the AC power is to kept, this is up to the installer for proper
relocation, JL Audio® is not responsible.
SB-T-TACCAB/10W3v3_INSTR_SKU#011230
INSTALLATION
D I F F I C U L T Y :
2
5
OUT
OF
ESTIMATED TIME:
1-2 HOUR
