background image

Your Electronic 

Lock is currently 

set with the default 

combination of:

1-2-3-4-1-2

MODEL: STL-HHS-BIO

Step 2:

 Pinch tabs together and slide out 

battery compartment

Step 1:

 Twist key LEFT (counter-

clockwise) to open door

IMPORTANT!

 

Test your new combination 

several times with the door open to ensure 

new combination is properly set before 

closing and locking safe.

Step 4:

 Hold down button 1 until green 

light turns on and lock beeps 2 times

Step 5:

 Enter your current 6 digit

combination - lock will beep 2 times

l

  

Factory default is 1-2-3-4-1-2

Step 6:

 Enter your new 6 digit 

combination - lock will beep 3 times

Step 7:

 Reenter your new 6 digit 

combination - lock will chime

Use switch next to interior light to turn 

silent mode on or off.

If you see a continuous red light on, 

replace battery

Scanner can register up to 31 fingerprints

l

  

Lock will go into standby after 10 

   seconds of inactivity

l

  

Lock will freeze for 5 minutes after 5   

   wrong combination attempts

l

  

Hold down biometric scanner button 

   until lock beeps 5 times

l

  

Lock will reset to factory       

   combination of 1-2-3-4-1-2 and 

   erase all registered fingerprints

*If lock beeps 5 times, lock light flashes red, and 

fingerprint scanner stays green, fingerprint was not 

installed successfully. Restart from Step 8.

*If lock beeps 5 times, combination was not 

installed successfully.  Restart from Step 4.

Step 8:

 Press ONCE (do NOT hold) biometric 

scanner button - lock will beep 2 times/lock 

light and finger scanner will illuminate green

Step 9:

 Position finger fully on biometric 

scanner - hold until lock chimes

Fingerprint installed successfully.

Step 3: 

Insert a 9V battery into battery 

compartment & slide battery compartment 

back into place

OPEN:

CHANGE YOUR COMBINATION:

SILENT MODE:

BATTERY LIFE:

OPERATING INFORMATION:

RESET LOCK:

BIOMETRIC SCANNER:

INSERT BATTERY:

Lock Instructions

1

Lock 

Light

Fingerprint

Scanner

2

3

4

RECORD NEW COMBINATION HERE:

Step 1

Step 2

Step 9

Step 3

Biometric

Scanner Button

Red Interior Light

Silent Mode 

Switch

Your new combination is now installed.

Reviews: