CHARGING THE BATTERY
BEFORE USE PLEASE ENSURE THE BATTERY IS FULLY CHARGED. TO CHARGE THE HEADSET FOLLOW THE INSTRUCTIONS BELOW...
1. INSERT THE MICRO USB CHARGING/TRANSMITTER CABLE (E) INTO THE CHARGING PORT (7) ON THE HEADSET. THE SMALLER END OF THE
CABLE GOES INTO THE HEADSET
2. PLUG THE OTHER END (USB TYPE A) OF THE CABLE INTO AN AVAILABLE USB PORT ON YOUR CHOSEN DEVICE
(PLEASE NOTE: YOU DO NOT NEED TO HAVE YOUR CHOSEN DEVICE POWERED ON TO CHARGE THE HEADSET)
3. CHARGING WILL NOW BEGIN AND THE LED WILL LIGHT
SOLID RED
- PICTURED BELOW. CHARGING USUALLY TAKES AROUND 5 HOURS, THE
HEADSET IS FULLY CHARGED WHEN THE LED TURNS OFF.
AFTER AROUND 14 HOURS OF USE, THE HEADSET AND TRANSMITTER LED'S WILL SLOWLY START FLASHING BLUE, THIS WILL SIGNAL THAT THE
BATTERY NEEDS TO BE RECHARGED.
CHARGING - SOLID RED
CHARGED - LED TURNS OFF
7
E
Summary of Contents for XP-Nighthawk
Page 1: ...UK SET UP INSTRUCTIONS...