Staubli SensoGate WA 130 H, User Manual

Page: 9 / 48

9
SensoGate® WA 130 H Product Coding
* Material combinations: Process-wetted part of calibration chamber / rinse-wetted part of calibration chamber /
immersion tube
WA 130 H - -
Explosion
protection
Hazardous area Zone 0
X
Without N
Sensor Solid electrolyte
0
Liquid electrolyte (pressurization possible)
1
Gasket material Elastomeric ring set F, FKM (Viton) FDA
F
Elastomeric ring set E, EPDM FDA
E
Elastomeric ring set G, FFKM/EPDM FDA
G
Elastomeric ring set H, FFKM/FFKM FDA
H
Process-wetted
materials *
)
1.4404 / 1.4404 / 1.4404 (electropolished)
G
Process adaptation Dairy pipe DN 50
C 1
Dairy pipe DN 65
C 2
Dairy pipe DN 80
C 3
Ingold socket 1.4404, 25 mm (G 1 1/4")
H 0 A
Ingold socket 1.4404, 25 mm (G 1 1/4“), hygienic
H 1 A
Clamp 1.5“, 1.4404
J 1 A
Clamp 2“, 1.4404
J 2
Clamp 2.5“, 1.4404
J 3
Clamp 3“, 1.4404
J 4
Clamp 3.5“, 1.4404
J 5
Varivent, 1.4404, for pipe, DN 50 or larger
V 1 A
Varivent, 1.4404, for pipe, ≥ DN 65 short, ≥ DN 80 long
V 2
BioControl size 50
L 1 A
BioControl size 65
L 2 A
Immersion depth Short
A
Long
B
Connection Media connection, PEEK
B
Media connection, PEEK, with integr. connector for additional medium
C
Free hose connection, PEEK (meas air, service air,
rinse-medium connection, additional-medium connection)
E
Special variant Without
0 0 0
Equipped with special grease (provided by customer)
0 0 1
With pneumatic limit signal for Unical 79(X)-2
0 0 4