Statpower Prosine 2.5 Owner'S Manual Download Page 18

PROsine 2.5/3.0 Advanced Control System (ACS) Owner’s Manual

 15

5. Warranty

Statpower manufactures its products from parts and components that are new or
equivalent to new in accordance with industry-standard practices.  Statpower
warrants the PROsine ACS Panel to be free from defects in workmanship or
materials for 24 months from the date of purchase.  Proof of purchase is required
for warranty service.  During the warranty period, Statpower will, at its option,
repair or replace the defective product free of charge. This warranty will be
considered void if the unit has suffered any physical damage or alteration, either
internally or externally, and does not cover damage arising from improper use or
from use in an unsuitable environment. This warranty will be considered void
where the product has been misused, neglected, improperly installed, or repaired
or modified by anyone other than Statpower without prior authorization by
Statpower.

Repair or replacement are your sole remedies and Statpower shall not be liable
for damages, whether direct, incidental, special, or consequential, even though
caused by negligence or fault.

Statpower owns all parts removed from repaired products.  Statpower uses new
and reconditioned parts made by various manufacturers in performing warranty
repairs and building replacement products.  If Statpower repairs or replaces a
product, its warranty term is 90 days or the balance of the original warranty,
whichever is longer.

This is Statpower's only warranty, and the Company makes no warranties, express
or implied, including warranties of merchantability and fitness for a particular
purpose.

Summary of Contents for Prosine 2.5




















Reviews: