background image

Front

Size:

 8.5"W x 11"H

Job

 

#:

  SWHC 111787

File

 

Name:

  111787_Force90_SS.ai

Printing

 

&

 

Finishing:

  4/cProc-Offset

Colors:

 

C

M

Y

DIE

Printout Size

100%

Updates:

 hd3.20/21.06, hd3.31.06, 

jpc4/3/06,hd4.04.06,hd4.10/11.06,
hd4.13.06,hd4.17.06,hd4.21.06,
JVSpf.4.26.06

This printout is for indicating 

color breaks only. 

Do not use for color matching.  

Do not measure for accuracy.

Revision:

  10

T i m e :

  3   P M

F

ORCE 90

 ™ 

90% EFFICIENT

Power-Vent Commercial Gas Water Heater

The 50-gallon, 76,000 BTU Force 90 light-duty commercial gas water heater is equipped with a fully submerged, spiral-shaped condensing heat 
exchanger. This design provides much greater heat transfer surface than a standard straight flue tube, resulting in 90% thermal efficiency and 
higher hot water output than comparable 80% efficient water heaters. With 22" diameter, the 50-gallon Force 90 can be installed in less space than 
a 75-gallon unit and delivers greater recovery and lower operating costs.

Power-Vent Design for Installation Versatility

•  Modular blower, with 120 volt, 60Hz electrical system (5 amps or less), 6-foot cord with  
 standard 

3-prong 

connector

•  Combined horizontal and vertical vent runs terminating through outside wall,  

 

  using Schedule 40 PVC pipe as follows:
  -  2" pipe allows vent runs up to 25 equivalent feet
  -  3" pipe allows vent runs up to 65 equivalent feet
  -  4" pipe allows vent runs up to 128 equivalent feet
•  Supplied with PVC pipe and elbows to connect heat exchanger outlet to blower,   
  including condensate elbow and drain
•  PVC Vent Attenuation Assembly (VAA) supplied to help ensure extra-quiet operation

Side-Mounted Taps for Recirculating Systems

•  Hot and cold “side taps” allow Force 90 to be used for “combination” systems    
  for water heating plus space heating, radiant floor heating or other applications   
  requiring a recirculating hot water loop
•  Plugs for recirculating taps are factory installed

Intelli-Vent

®*

 

Gas Control with Silicon Nitride Hot Surface Ignitor

•  Premium-grade hot surface ignitor eliminates standing pilot
•  Electronic circuitry provides superior system diagnostic capabilities plus extremely  
  precise temperature control
• 180°F maximum temperature setting

Glass Lined Tank with Two Magnesium Anode Rods

•  Provides superior protection against corrosion
•  Glass lining protects all “water side” tank surfaces plus inside of internal heat    
  exchanger exposed to condensate

Low-NOx Green Choice

®

 Burner

•  Reduces NOx emissions up to 33%, complies with Southern California and Texas  
 requirements

PEXAN

 Diffuser Dip Tube

•  Helps reduce lime and sediment buildup, maximize hot water output
•  PEXAN cross-link polymer withstands long-term exposure to temperatures up to 400°F

Factory-Installed Temperature and Pressure Relief Valve
Maximum Hydrostatic Working Pressure: 150 psi
Meets ASHRAE/IESNA 90.1-1999

•  Design-certified by UL (Underwriters Laboratories) according to ANSI Z21.10.3-CSA4.3  
  standards governing storage-type water heaters

Three-Year Limited Tank Warranty

•  Consult written warranty shipped with water heater or contact State for complete 
 warranty 

information

For Additional Technical Information,

PHONE 800-365-0024

State Industries, Inc.

500 Tennessee Waltz Parkway, Ashland City, TN 37015

www.statewaterheaters.com

Page 1 of 2

SCGSS00806

* Intelli-Vent is a registered trademark of the Emerson Electric Company

 

Reviews: