Page 3
DANGER - to reduce the risk of electrical
shock:
1. Always unplug the machine from the electrical
outlet before cleaning or servicing.
2. This machine is not intended to be serviced by
the end user, refer servicing to qualified person-
nel only.
3. This product will be wired for either 120 VAC
nominal power input OR 230 VAC nominal input.
It is factory-equipped with a specific electric cord
and plug to permit connection to the proper
electric circuit. Make sure that the product is con-
nected to a dedicated power line having an outlet
with the same configuration as that of the plug.
4. Improper connection of the equipment-ground-
ing conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman
if you are in doubt as to whether the product
is properly grounded. Do not modify the plug
provided with the product. NO adapter should
be used with this product. If the product must be
reconnected for use on a different type of electric
circuit, the reconnection should be made by qual-
ified service personnel in order to avoid a hazard.
5. If the power supply cord is damaged, it must be
replaced by the manufacturer, its service agent, or
similarly qualified persons in order to avoid
hazard.
WARNING - to reduce the risk of burns, fire,
electrical shock, or injury to person:
1. This machine is not intended to be used by
children. It is not intended to be used by persons
with reduced physical, sensory, or mental capabil-
ities or lack of experience and knowledge, unless
given instruction and under the personal super-
vision concerning use of the machine by a person
responsible for their safety. Do not leave children
unsupervised around the machine.
23.6 in (0.6 m)
78.8 in (2.00 m)
23.6 in (0.6 m)
78.8 in (2.00 m)
Required Clearance
2. Assemble and operate the machine on a solid
level surface. Position the machine with a mini-
mum of 23.6 inches (0.6 meters) of clearance on
each side to allow for ease of mounting and dis-
mounting. Allow for 78.8 inches (2.00 meters) of
clearance behind the machine. These dimensions
are the recommended minimum distances. The
actual area for access and passage is the respon-
sibility of the facility and should take into account
this training envelope and any other national or
local codes or regulations.
3. Keep power cord away from heated surfaces.
Unplug power cord when the machine is unat-
tended and before performing any preventative
maintenance such as cleaning or replacing a
worn part.
IMPORTANT SAFETY INSTRUCTIONS
Before using this product, it is essential to read the ENTIRE Owner’s Manual and ALL installation
instructions. The Owner’s Manual describes equipment setup and instructs members on how to use
correctly and safely.
Read all warnings posted on the machine.
Health related injuries may result from incorrect or excessive use of exercise equipment. STAR TRAC
strongly recommends you to encourage your members to discuss their health program or fitness
regimen with a health care professional, especially if you or they have not exercised for several years,
are over 35, or have known health conditions.
WARNING!
Summary of Contents for FREERUNNER 10-TRx
