Page 7
PROCEDURE
1.
Unpack all parts and inspect for
damage.
2.
Install left upright handrail (740-9452-
XX) onto frame using a 13mm socket
to secure two pieces each of the M8
x 70mm (110-4075) and M8 x 20mm
(110-4076) hex head screws.
DO NOT
FULLY TIGHTEN
If installing the 4TR 15”
Embedded Touchscreen Console, use
the install instructions in the console
manual 620-8816 instead.
Fig. 6
Assembly instructions cover either 10” touchscreen or LCD console. For 15” Embedded, please see the
console manual 620-8816 for additional wiring and configuration information.
Required Tools:
• 13mm Socket
• Torque Wrench
• 5mm Allen Key
• #2 Phillips Screwdriver
• 3/4” Open-ended Wrench
• 9/16” Open-ended Wrench
IF INSTALLING PVS - PLEASE REFER TO PVS INSTALL INSTRUCTIONS FOR ROUTING THE COAX
CABLE BEFORE CONTINUING WITH UNIT BASE ASSEMBLY.
ASSEMBLY
SCAN TO WATCH A VIDEO
SHOWING THE ASSEMBLY
OF THIS TREADMILL
