Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: March 31, 2020 9:15 AM
Product Diagram (TB3DKM2DPL)
Component
Function
1
Thunderbolt 3 Host
Connector
•
Used to connect the
Docking Station
to a
Host
Laptop
.
2
DisplayPort Video Ports
(x 2)
•
Used to connect
Display Devices
to the
Docking Station
.
3
USB-A Port
•
Used to connect
Peripherals
to the
Docking
Station
.
4
RJ45 Port
•
Used to connect a
Network Device
to the
Docking Station
.
Requirements
For the latest requirements, please visit
www.startech.com/TB3DKM2DPL
•
A host laptop with Thunderbolt 3 port
•
Two DisplayPort equipped display(s) with cable(s)
•
A 4K-capable display is required to achieve 4096 x 2160p resolution
•
A 5K-capable display is required to achieve 5120 × 2880 resolution
•
Operating Systems:
•
Windows® 10 and 8/8.1
•
macOS 10.12 and 10.13
Note:
Video output capabilities are dependent on the video card and hardware
specifications of your connected host laptop
Installing the Docking Station
The
Docking Station
is natively supported when connected to the
Host Laptop
running
Windows 10, 8/8.1 or macOS operating systems. The
Docking Station
will automatically
detect and install the required drivers once connected to the
Host Laptop
.
Thunderbolt™ 3 Dual DisplayPort Mini Bus Powered Docking Station for Laptops | 4K 60Hz | 28 cm Host Cable
Connecting Displays to the Docking Station
Dual 4K monitor installation
•
Connect a
DisplayPort Cable
(sold separately) to the
DisplayPort Video Ports
on
the
Docking Station
and the other end to a
DisplayPort Port
on the back of each
of the
4K
Display Devices
.
5K monitor installation
•
Connect a
DisplayPort Cable
(sold separately) to a
DisplayPort Video Port
on the
Docking Station
and the other end to a
DisplayPort Port
on the back of the
5K
Display Device
.
Connecting Peripherals to the Docking Station
•
Connect a
Peripheral’s USB-A Connector
to the
USB-A Port
on the
Docking
Station
(e.g. USB device, etc.).
Connecting the Docking Station to a Network Device
•
Connect a
Cat5e/6 Cable
(sold separately) to the
RJ45 Port
on the
Docking Station
and the other end to a
Network Device
.
Connecting the Dock to the Host Laptop
•
Connect the
Thunderbolt 3 Host Port
on the
Docking Station
to a
Thunderbolt 3
Port
on the
Host Laptop
.
Installing Drivers
When the
Docking Station
is connected to the
Host Laptop
, the required drivers
should automatically install.
In Windows 10 or 8/8.1 you might see a pop-up message requesting permission to
allow the
Docking Station
to connect to the
Host Laptop
. If you see this pop-up
message, do the following:
1.
Click on the pop-up message.
2.
Select
Always Connect
from the list.
3.
Click
OK
. If required, follow any other on-screen instructions to complete the
installation.
1
2
3
4
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per
