Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: July 16, 2021 4:42 PM
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Product IDs
SHELF-2U-14-CENTER-V
SHELF-2U-20-CENTER-V
Product Diagram
Front - Angled View
Component
Function
1
Shelf Lip
• Mount the
2U Vented Center-Mount Shelf
with the
Shelf Lip
oriented upwards to prevent
Equipment
from slipping off
2
Mounting Holes (x 8)
• Mount the
2U Vented Center-Mount Shelf
into a
Rack
or
Cabinet
.
Product Information
For the latest manuals, product information, technical specifications, and declarations
of conformance, please visit:
www.StarTech.com/SHELF-2U-14-CENTER-V
www.StarTech.com/SHELF-2U-20-CENTER-V
Requirements
• 2U Available Rack Space
• Phillips Head Screwdriver
• (Optional) Cage Nut Tool
2U Vented Center-Mount Shelf - 14/20 in. Depth
Warnings
• Read the entire manual and ensure the instructions are fully understood before
assembling and/or using this product.
• Before adding equipment to this product, ensure this product has been properly
mounted.
• Ensure the weight of the equipment does not exceed the weight capacity of this
product. If the weight capacity is exceeded, personal injury or damage to the
equipment are possibilities. This product can support the following weight: up to
200.6 lb. (91 kg). This product can only support the maximum weight capacity if 8
M6 Screws / Cage Nuts / Plastic Washers are used to affix this product to a rack or
cabinet.
Package Contents
• 2U Vented Center-Mount Shelf x 1
• M6 Cage Nuts x 10
• M6 Screws x 10
• M6 Plastic Washers x 10
• Quick-Start Guide x 1
Installation
Mount the 2U Vented Center-Mount Shelf into a Rack or Cabinet
Use the included
M6 Cage Nuts
,
M6 Scre
w
s
, and
M6 Plastic Washers
to install the
2U
Vented Center-Mount Shelf.
Notes:
This product can support the following weight:
200.6 lb. (91 kg)
.
The following installation instructions are for square mounting holes.
1. Locate a suitable location in a
Rack
or
Cabinet
to mount the
2U Vented Center-
Mount Shelf
.
Note:
The
2U Vented Center-Mount Shelf
itself requires
2U
of space within a
Rack
or
Cabinet
.
2. Insert the
Wing
(side) of an
M6 Cage Nut
into the back of the a
Cage Nut Hole
.
3. Insert the second
Wing
of the
M6 Cage Nut
into the selected
Cage Nut Hole
, using
pressure by hand, or with a
Cage Nut Tool
.
1
*Product may vary from image
2
