11
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
5.
Align the
Large Washers
(x 2) over the
Pilot Hole
. (Figure 9)
6.
Align the hole, located towards the front of the
Angled
Bracket
, with the hole, located in the
Large Washers
.
7.
Insert the
Screw Assembly
through the
Angled Bracket
,
the
Large Washers
, and into the
Tabletop
and partially
tighten, using a
Phillips Head Screwdriver
.
8.
Adjust the tension of the
Screw Assembly
to adjust the ease
of rotation.
Mounting Option #3 - Wall Mount
1.
Place the
Angled Bracket
onto the intended mounting
location, on a
Wall
.
2.
Mark the location of the
Screw Holes
(x 3), using a
Pencil
.
3.
Remove the
Angled Bracket
and drill appropriately sized
Pilot Holes
(x 3)
in the
Wall
, using an
Electric Drill
.
Figure 10
5 x 20
mm Self
Tapping
Screws
Small Washers
