9
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Mounting the Angled Bracket
•
Remove the
Adhesive Backing
from the
Rubber Pads
(x 4)
and affix to the base of the
Angled Bracket
. (Figure 7)
Mounting Option #1 - Tabletop- Fixed
1.
Place the
Angled Bracket
in the intended mounting
location, on a
Tabletop
.
2.
Mark the location of the
Screw Holes
(x 3), using a
Pencil
.
3.
Remove the
Angled Bracket
and drill appropriately sized
Pilot Holes
(x 3) to an appropriate depth
in the
Tabletop
,
using an
Electric Drill
.
Figure 7
Rubber Pads
Figure 8
5 x 20 mm Self Tapping
Screws
Small Washers
