Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: February 4, 2021 5:57 PM
Product Diagram (PRIVSCNMONxx)
Component
Function
1
Privacy Filter
• Privacy comes into effect when viewing
anywhere past 30 degrees from the left and
right of center
• Total field of view of 60 degrees
2
Mounting Tabs (x 5)
• Secure the
Privacy Filter
to the
Monitor’s
surface
• The adhesive on the
Mounting Tabs
becomes less effective with frequent removal/
reapplication
3
Adhesive Strips (not
displayed)
• Secure the
Privacy Filter
to the
Monitor’s
surface
• The
Adhesive Strips
become less effective
with frequent removal/reapplication
Package Contents
• Privacy Screen x 1
• Set of Adhesive Strips x 1 (screens up to 27”) or 2 (screens larger than 27”)
• Set of Mounting Tabs x 1
• Wiping Cloth x 1
• Quick Start Guide x 1
Requirements
For the latest requirements, please visit the following link and replace “xx” with the desired
privacy filter size:
Universal Privacy Filter
Install the Privacy Filter -- Adhesive Strips
For installations that are intended to be permanent, or if the
Monitor
does not feature
large
Bezels
, please use the
Adhesive Strips
.
1. Clean the
Laptop Display
and
Bezels
, using the
Wiping Cloth
.
2. Select the side of the
Privacy Filter
that is intended to face outward (i.e. matte or
glossy side) and place the
Privacy Filter
on a clean and flat surface with the selected
side facing down.
3. Remove all the
Adhesive Strips
from the
Transparent Lining
.
Removing the Adhesive Strips
4. Carefully align the
Adhesive Strips
along the edges (top, bottom, left, and right) of
the
Privacy Filter
and affix to the
Privacy Filter
by applying firm pressure to all the
Adhesive Strips
.
Applying the Adhesive Strips
5. Carefully remove the
Protective Backing
from the
Adhesive Strips
, exposing the
screen side adhesive.
Remove the Protective Backing from the Adhesive Strips
1
2/3
