Page 13
Reset Button
Reboot the Print Server:
1.
Verify the power of print server is turned on.
2.
Press the reset button once, and then release it.
Note: This will restart the print server and stop all on -going and pending print jobs.
Print a Self-test Page
1.
With the print server powered on and your printer connected and powered, press the reset
button for 8 seconds, and then release it.
2.
A test page including the current print server settings will be printed.
Reset to Factory Defaults:
1.
Disconnect the power adapter from the print server.
2.
Hold down the reset button.
3.
Reconnect the power adapter while continuing to hold the reset button for about 5 seconds.
4.
Release the reset button.
5.
The print server will restart.
WARNING: This will erase all settings on the print server and return it to factory default.
Default Settings
Username: admin
Password: (None)
Wireless Mode: Ad-Hoc (Peer-to-Peer)
SSID: PM1115UW
IP Address: 192.168.0.10
