Instruction Manual
DE:
Bedienungsanleitung - de.startech.com
FR:
Guide de l'utilisateur - fr.startech.com
ES:
Guía del usuario - es.startech.com
IT:
Guida per l'uso - it.startech.com
NL:
Gebruiksaanwijzing - nl.startech.com
PT:
Guia do usuário - pt.startech.com
Manual Revision: 04/23/2012
For the most up-to-date information, please visit: www.startech.com
MCM110SC2P / MCM110SC2PGB
MCM110ST2P / MCM110ST2PGB
10/100 MM Fiber to Ethernet Media Converter SC/ST with PoE
Packaging Contents
• 1 x Fiber to Ethernet Media Converter
• 1 x Power Adapter (
MCM110SC2P and
MCM110ST2P only)
• 1 x Instruction Manual
System Requirements
• 10/100Base compatible network
• For PoE operation: 802.3af compliant PSE (Power
Sourcing Equipment)
Installation
1.
Connect the Ethernet cable to the Fiber Media Converter
“LAN” port.
2.
Connect the other end of the Ethernet cable to the router/
switch/computer NIC. If connecting the media converter to
a 802.3af compliant PSE, skip Step 3.
3.
Optional (Non-PoE operation):
Plug a power adapter into
the media converter, and into an available AC power outlet.
4.
Connect the fiber cable into the fiber receptacle on the
media converter.
5.
Connect the other end of the fiber cable into the router/
switch/computer NIC/another media converter. Remember
to reverse the TX and RX leads between the two devices.
*actual product may vary from photos
LED Indicators
LED
Function
State
Status
PWR
Power
Indicator
ON
Converter has
Power
OFF
Converter has no
Power
FX Link/Act
Fiber Link/
Activity
ON
Fiber Link on
OFF
No Link Detected
Flashing
Receiving Data
POE
Power over
Ethernet
ON
PoE mode
enabled
OFF
PoE mode not
enabled
100
Mode
ON
100Mbps
OFF
10Mbps
Full
Duplex Mode
ON
Full Duplex Mode
OFF
Half Duplex
Mode
TX Link/Act
Ethernet Link/
Activity
ON
Ethernet link
Detected
OFF
No Link Detected
Flashing
Receiving Data
