Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support
Manual Revision: May 18, 2022 3:20 PM
3
1
Product Diagram (LAPTOP-SIT-STAND)
Front View
Bottom View
Component
Function
1
Slide Button
• Push-in
to
Raise
or
Lower
the workstation
2
Workstation Surface
• Place a laptop, keyboard, and a mouse
3
Upper Frame
• Supports the workstation. Adjusts the
Height
in
Six
Different
Positions
from 1.8 to 15.9 in (45 to 405 mm)
4
Lower Frame
• Stabilizes the workstation. Foam pads at the bottom
protect the desk surface
5
Finger Guard
• Helps prevent trapping your fingers when
Lowering
the workstation
Ergonomic Adjustable Laptop Sit Stand Desk Converter
Package Contents
• Desktop Sit-Stand Workstation x 1
• Quick-Start Guide x 1
Requirements
For the latest manuals, product information, technical specifications, and declarations of
conformance, please visit:
www.startech.com/LAPTOP-SIT-STAND
Installation
WARNINGS!
Do not exceed the weight capacity of this product. Overloading this product might
result in injury or property damage. This product can support the following weight: up
to 17.6 lb (8 kg).
When adjusting the height of this product, ensure that the mounted equipment is
properly secured and the weight is supported until the locking mechanism is fully
engaged. Adjust the height at a slow speed to prevent any equipment instability.
Failure to follow these guidelines may result in property damage and/or personal
injury.
Stored Energy Hazard!
This product contains a spring mechanism that can cause the
assembly and/or mounted equipment to move forcibly and quickly upwards when the
slide button is pressed.
Pinch Hazard!
Keep your fingers clear from moving components. Do not place your
fingers past the finger guard at the bottom of the workstation surface when lowering
it.
1.
Cut
the security plastic
Tie
that
Holds
the
Upper Frame
to the
Lower Frame
.
2.
Carefully Remove
the foam
Pad
installed on the
Slide Button
.
Operation
When adjusting the height of this product, always use two hands to ensure a
controlled movement.
If
the slide button is pushed in and without releasing, you can adjust the height of the
upper frame in one movement to any of the available height positions. Until the slide
button is released, the height of the upper frame cannot be locked.
Due
to the spacing of the locking holes, the user must continue to support the
workstation weight until the locking mechanism is engaged.
2
4
5
