®Registered trademark of JET Equipment & Tools Ltd.
M15-ST849802-19
www.startechlighting.com
Operation Manual
Professional Flashlights
Thank you for purchasing a professional
quality STARTECH
®
flashlight. Please
read this document in its entirety to
ensure you are getting the most out of
your flashlight. With proper care your
STARTECH
®
flashlight will provide many
years of reliable service.
Features
• Highly efficient Cree
®
Surface
Mounted Diode produces an intense
ultra-bright white light
• SMD technology is more robust and
produces 2 x the light of standard
LED bulbs
• Lifetime of up to 100,000 hours
• Machined aluminum reflector gathers
and focuses light for maximum
output
• Advanced Focus System allows user
to focus from spot to wide angle
beam
• Aircraft-grade aluminum body for
durability and resistance to corrosion
• Premium Stage III anodization
resists scratches and meets military
specifications
• IPX-6 water resistant rating
• Drop tested to 1.5 meters
• Gold-plated contacts prevent
corrosion
• 5-way switch cycles between 100%,
50%, 25%, flashing, and SOS modes
(except model JLPL-100)
• Tail-mounted switch for tactical
applications (except model JLPL-500)
• Reverse polarity protection prevents
damage if batteries are inserted
incorrectly
• All models include batteries, lanyard,
and spare o-rings (batteries not
included with model JLFL-600U)
Operating Instructions
1. Remove tail cap and insert batteries
with positive (+) pole facing toward
front of flashlight.
2. Press tail switch halfway for
temporary light or to cycle through
various power modes if available (see
chart). Press fully until button clicks
to turn flashlight on. Press button
multiple times to cycle through 100%,
50%, 25%, flash, and SOS power
modes. Once a mode has been
selected and engaged for 5 seconds,
pressing switch again turns off
flashlight.
3. Pull head of flashlight forward or
backward to focus from narrow spot
to wide beam
4. For model JLFL-600U: to recharge,
plug included cable into any USB
charging device. To reveal USB port
rotate center collar. Can also be
powered with 3 x AAA batteries (not
included).
Maintenance
1. Do not attempt to dismantle sealed
parts of the flashlight.
2. Use quality batteries and replace all
batteries at the same time with the
same brand.
3. Periodically inspect the o-rings at the
base of the threads on the battery
cap and lens housing and replace if
nicked, torn, gouged or otherwise
damaged to maintain water
resistance.
4. If flashlight is to be stored for long
periods, remove batteries to prevent
damage due to leakage.
5. If light does not turn on, replace
batteries. If performance is not
satisfactory, clean battery contact
points inside tube with rubbing
alcohol. If performance is still not
satisfactory, return light to your dealer
for repair or replacement under our
standard warranty policy.
6. Do not dispose of batteries in
household trash.
Warranty
One-Year Limited Warranty Against
Defects in Materials or Workmanship
STARTECH
®
warrants this product
to be free of defects in materials or
workmanship for a period of one year
after sale to the end user. Please see
your dealer for instructions on making a
warranty claim. Note: batteries shipped
with this product may have been subject
to long storage periods prior to final sale.
Batteries are provided as a convenience
only. Please source replacement
batteries locally. Dead or weak batteries
do not constitute a warranty claim.
Prod. No.
Model No.
Beam
Distance
Lumens @
100%
Lumens @
50%
Lumens @
25%
Run Time
@ 100%
Run Time
@ 50%
Run Time
@ 25%
849802
JLPL-100
50m
100
n/a
n/a
5 hours
n/a
n/a
849811
JLFL-100
200m
100
50
25
2 hours
4 hours
8 hours
849812
JLFL-150
200m
150
70
35
2 hours
4 hours
8 hours
849816
JLFL-200
200m
200
100
50
3 hours
6 hours
12 hours
849817
JLFL-230
200m
230
110
50
6 hours
12 hours
24 hours
849818
JLFL-500
300m
500
300
150
3 hours
10 hours
20 hours
849819
JLFL-600U
150m
600
300
150
2 hours
3.5 hours
7 hours
Specifications
WARNING! Surface Mounted
Diodes emit very bright light.
Never shine beam directly
into anyone’s eyes and do
not look directly into beam
to prevent risk of permanent
damage to eyesight.
WARNING! Surface Mounted
Diodes emit very bright light.
Never shine beam directly
into anyone’s eyes and do
not look directly into beam
to prevent risk of permanent
damage to eyesight.
