Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: July 18, 2019 11:29 AM
Product Diagram (ITB20D3250)
Component
Function
1
Power Connector (side)
• Used to power the
Adapter
.
2
LED Indicator
•
Solid:
Indicates that the
Adapter
is powered
On.
•
Off:
Indicates that the
Adapter
is not receiving
power.
3
Terminal Block Wires
• Used to connect and power a
Device
.
•
Red Wire
= Positive
•
Black Wire
= Negative
•
Output
= 20V
•
Current
= 3.25A 65W
Requirements
For the latest requirements, please visit
• (Optional) Small Flat Head Screwdriver x 1
• Device with a Two or Three Conductor Terminal Block Connector x 1
Using the Two Conductor Terminal Block Connector
1. Remove the
Two Conductor Terminal Block Connector
from the
Device
, you want
to power.
2. Plug the
Two Conductor Terminal Block Connector
on the
Adapter
into the
Terminal Connector
on the
Device
.
Note:
Ensure the polarity of the input power is correctly matched with the
Terminal
Block Pins
to ensure proper functionality. Refer to the
Device’s
vendor manual for
further information on properly wiring the
Device
.
Universal 65W DC Power Adapter | 20V 3.25A | Industrial
Two Conductor Terminal Block Connector
Using the Three Conductor Terminal Block Connector
1. Using a small screwdriver (Flat Head), loosen the screws on the
Two Conductor
Terminal Block Connector
and carefully remove the
Terminal Block Wires
from
the
Two Conductor Terminal Block Connector
.
2. Using a small screwdriver, loosen the screws on the
Three Conductor Terminal
Block Connector
(included)
and carefully insert the
Terminal Block Wires
into the
Three Conductor Terminal Block Connector
(Red Wire = Positive
and Black Wire =
Negative).
Note:
Ensure the polarity of the input power is correctly matched with the
Terminal
Block Pins
to ensure proper functionality. Refer to the
Device’s
vendor manual for
further information on properly wiring the
Device
.
3. Tighten the screws on the
Three Conductor Terminal Block Connector
, to secure
the
Terminal Block Wires
into the
Three Conductor Terminal Block Connector
.
Three Conductor Terminal Block Connector
4. Plug the
Three Conductor Terminal Block Connector
on the
Adapter
into the
Terminal Connector
on the
Device
.
Powering the Adapter
• Connect the
Power Cord
to the
Power Connector
on the
Adapter
and to an
AC
Electrical Outlet
.
1
2
3
