background image

3

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Warning Statements

•  Make sure to assemble this product according to the instructions. Failure to 

do so might result in personal injury or property damage.

•  Make sure that the weight of the TV doesn’t exceed the weight capacity 

of this product. If you exceed the weight capacity, you might experience 

personal injury or damage to the equipment. This product can support the 

following weight:  Up to 75 kg (165 lb.).

•  Never operate this product if parts are missing or damaged.

•  The wall mount is designed to be  installed on a wood stud, solid concrete, 

or cinder block wall. The wall structure should also be capable of supporting 

at least four times the weight of the mounted equipment. The mounting 

hardware included with this product may not be adequate for installation on 

certain wall structures. Failure to comply with these warnings may result in 

personal injury or damage to the equipment.

•  The mounting hardware included with this product might not be adequate 

for some wall structures. If you lack the necessary expertise to attach this 

product to the wall structure that you’re using, contact a construction 

professional to install the wall mount or to provide specific mounting 

instructions for your wall structure.

Dichiarazioni di avvertenza

•  Assemblare il prodotto rispettando le istruzioni. Il mancato rispetto delle 

istruzioni potrebbe causare danni a persone o proprietà.

•  Verificare che il peso del monitor non superi la capacità di supporto del 

prodotto. In caso di superamento della capacità di supporto potrebbero 

verificarsi danni a persone o apparecchiature. Il prodotto è in grado di 

supportare i seguenti pesi: 75 kg.

•  Non utilizzare il prodotto in presenza di parti mancanti o danneggiate.

•  Le caratteristiche dei muri sono variabili ed è importante verificare che 

la struttura muraria e l’hardware di montaggio in uso siano in grado di 

supportare adeguatamente le apparecchiature montate. Il mancato rispetto 

delle istruzioni potrebbe causare danni a persone o proprietà. La struttura 

muraria deve essere in grado di supportare un peso almeno quattro volte 

superiore a quello dell’apparecchiatura montata.

•  L’hardware di montaggio incluso con il prodotto potrebbe non essere 

adeguato ad alcune strutture murarie. Se l’utente non dispone delle 

competenze necessarie per agganciare il prodotto alla struttura muraria 

in uso, dovrà contattare un professionista edile per installare il supporto a 

parete o ottenere istruzioni di montaggio per la struttura muraria in uso. 

Summary of Contents for FPWTLTB1































Reviews: