Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: December 2, 2019
Product Diagram (DKT30CHVAUSP)
Side View
Rear View
Port
Function
1
VGA Output Port
• Connect a
VGA Display Device
2
RJ45 Port
• Connect a
Network Cable
3
USB-C Port
• Connect a
USB-C Storage Device
(e.g. flash drive),
or
USB-C Peripheral Device
• Connect the
Host Computer’s Power Adapter
for
Power Delivery
passthrough
4
SD Card Slot
• Connect an
SD Card
5
USB-A Ports
• Connect a
USB-A Peripheral Device
• Charge a
USB-A Peripheral
6
HDMI Output Port
• Connect an
HDMI Display Device
7
USB-C Host Connector
• Connect to a
Laptop
or
Computer
8
3.5 mm Audio Port
• Connect an
Audio Device
with a 4-position jack
USB-C™ Multiport Adapter - 4K HDMI/VGA - SD™ - 2x USB-A/1x USB-C - 100W PD 3.0
Requirements
For the latest requirements and to view the full manual, please visit:
.
• Host Computer with USB-C Port
Installation
Powering the Multiport Adapter
USB Power Delivery 3.0 - Bus Power:
The
Multiport Adapter
is powered by the
Host Computer’s USB-C Port
and does not
require a separate power adapter. For power delivery passthrough follow these steps.
1. Connect the
Multiport Adapter
to a
USB-C Port
on the
Host Computer
using the
USB-C Host Connector.
2. Connect the
USB-C Connector
from the
Host Computer’s Power Adapter
to the
USB-C Port
on the
Multiport Adapter
.
3. The
Host Computer’s Power Adapter
will power the
Multiport Adapter
and pass
power through to the
Host Computer
.
Windows 7 Driver Installation
1. Connect the
Multiport Adapter
to a
USB-C Port
on the
Host Computer
using the
USB-C Host Connector.
The
Found New Hardware
pop-up will appear.
2. On the
Found New Hardware
pop-up, click the
Cancel
button.
3. Using a web browser, navigate to the StarTech.com website:
www.startech.com/DKT30CHVAUSP.
4. On the
Product
screen, click the
Support
tab.
5. In the
Drivers and Downloads
section, click on the driver link that corresponds with
the operating system running on the
Host Computer
.
6. Once the download is complete, extract the contents of the .Zip file.
7. Click the appropriate driver for the version of operating system that you are running
and follow the on-screen prompts to complete the installation.
1
2
3
4
5
6
7
8
