Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: February 18, 2021
Product Diagram (DK31C2DHSPD and DK31C2DHSPDUE)
Front View
Port
Specifications and Installation
1
Power LED Indicator
• Solid White LED
indicates the
Docking Station
is
receiving power and is powered
ON
2
3.5mm Audio Port
• Connect an
Audio Device
• 4 Position Audio Jack
for
Headset
use
3
USB-C Charging Port
• SuperSpeed USB 10Gbps (USB 3.2 Gen 2)
• Supports charging of up to 5V/3A
• Connect the
Docking Station
to a
SuperSpeed USB
10Gbps Peripheral
or
Storage Device
(e.g. flash
drive), using a
SuperSpeed USB-C 10Gbps (USB 3.2
Gen 2) Cable
4
USB-C Charging Port
• SuperSpeed USB 10Gbps (USB 3.2 Gen 2)
• USB Power Deliver (PD) 3.0
• Supports charging of up to 5V/3A
• Connect the
Docking Station
to a
SuperSpeed USB
10Gbps Peripheral
or
Storage Device
(e.g. flash
drive), using a
SuperSpeed USB-C 10Gbps (USB 3.2
Gen 2) Cable
5
SD Card Slot
• Secure Digital (SD) 4.0 UHS-II, SD 3.0, 2.0, 1.1, and 1.0
compatibility
• Push an
SD Card
, label side up, into the
SD Card Slot
until it clicks into place
Note:
The Host Computer’s Operating System (OS)
will automatically detect the SD Card and install the
required driver software.
• Push then pull the
SD Card
to remove
USB-C™ 10Gbps Gen 2 Triple Monitor Docking Station - 2x DP + HDMI - 100W PD - DP 1.4 MST
Left Side View
Port
Specifications and Installation
6
Power Button
• Powered
ON
by default
• Press and release the
Power Button
to power
OFF
the
Docking Station
Right Side View
Port
Specifications and Installation
7
Nano Lock Slot
• Secure the
Docking Station
to a stationary object
8
Lock Slot
• Secure the
Docking Station
to a stationary object
Rear View
Port
Specifications and Installation
9
USB-A Device Ports
• SuperSpeed USB 5Gbps (USB 3.2 Gen 1)
• Connect the
Docking Station
to two
SuperSpeed
USB 5Gbps Peripherals
or
Storage Devices
(e.g. flash
drives), using
SuperSpeed USB 5Gbps (USB 3.2
Gen 1) Cables
10
USB-A Device Ports
• USB 2.0
• Minimum 2.5W (5V/0.5A) power output
• Connect the
Docking Station
to two
USB-A
Peripherals
and/or
Storage Devices
(e.g. flash drives),
using
USB Cables
2
3
4
1
5
6
7
8
9
13
15
14
10
11
12
