Instruction Manual
DE:
Bedienungsanleitung - de.startech.com
FR:
Guide de l'utilisateur - fr.startech.com
ES:
Guía del usuario - es.startech.com
IT:
Guida per l'uso - it.startech.com
NL:
Gebruiksaanwijzing - nl.startech.com
PT:
Guia do usuário - pt.startech.com
Manual Revision: 02/05/2015
For the most up-to-date information, please visit: www.startech.com
Packaging Contents
• 1x 2U Horizontal Cable Manager (for CMPNL2U) or 1 x 2U Combo
Cable Manager (for CMPNL2U
xx)
• 24 x Cable Clamps
• 4 x 5/8” #10-32 UNF Screws
• 4 x #10-32 UNF Cage Nuts
• 4 x 5/8” #12-24 UNC Screws
• 4 x #12-24 UNC Cage Nuts
System Requirements
• 2U of Rack Space
CMPNL2U
xx
2U Finger Duct and D-Ring Hook Rack Cable Manager
Product Diagram
CMPNL2U
CMPNL2UC
Installation
1. Determine the location on the rack where you want to install the
cable manager; an open 2U space is required.
2. Depending on the rack type, insert the four provided #10-32
or #12-24 cage nuts on opposite posts at equal height levels/
positions.
3. Align the cable manager mounting points with the cage nuts on
the rack.
4. Using the four provided #10-32 or #12-24 screws and a
screwdriver, secure the cable manager to the rack.
5. Insert the provided Cable Clamps into the front Cable Clamp
mounting points as desired.
6. Insert and organize your cables as desired.
Mounting Point
Horizontal
D-Ring Hook
Cable Clamp
Mounting Point (x24)
Mounting Point
Mounting Point
Vertical
D-Ring Hook
Horizontal
D-Ring Hook
Cable Clamp
Mounting Point (x24)
Mounting Point
CMPNL2UCD
Mounting Point
Vertical
D-Ring Hook
Horizontal
D-Ring Hook
Cable Clamp
Mounting Point (x24)
Mounting Point
