Instruction Manual
107
Viewing DAI Informations
•
From the
DAI Informations
page, the following information will be displayed:
•
DAI:
Displays the current DAI status (
Enabled
or
Disabled
).
Configuring Dynamic VLAN Settings
1.
On the
DAI Informations
page, enter a VLAN numbers within the VLAN List
field.
2.
Select a
Status
either enable or disable Dynamic VLAN on the corresponding
VLAN ID.
3. Click the
Apply
button.
Viewing DAI VLAN Setting
•
On the
DAI VLAN Settings
page, the following information will be displayed
•
VLAN LIST:
Displays the VLAN ID.
•
Status:
Displays whether Dynamic ARP Inspection is enabled or disabled on
the corresponding VLAN ID.
Configuring DAI Port Settings:
1.
On the
DAI Port Setting
page, select the port(s) you want to apply the DAI port
settings to apply to.
2.
Select a
Type
either
Un Trusted
or
Trusted.
3.
Select whether to
enable or disable
Src-Mac Chk:
•
If enabled, the system compares the source MAC address in the Ethernet
header to the sender MAC address in the ARP body. If the MAC addresses
are different the system tags it as invalid and drops the packets. This check is
performed on both ARP requests and responses.
4.
Select whether to enable or disable
Dst-Mac Chk.
•
If enabled, the system compares the destination MAC address in the
Ethernet header to the target MAC address in the ARP body. If the MAC
addresses are different the system tags it as invalid and drops the packets.
This check is performed on ARP responses.
