Instruction Manual
86
2.
Next to the corresponding
Port
switch port number, select a
Membership
type:
•
Static:
The interface is a member of the IGMP.
•
Forbidden:
The interface is forbidden from automatically joining the IGMP
via Multicast VLAN Registration (MVR).
•
None:
The interface is not a member of the VLAN. Packets associated with
this VLAN are not transmitted by the interface.
3.
Click the
Apply
button to apply your changes.
Clearing/Refreshing IGMP Snooping Statistics
1.
On the
IGMP Snooping Statistics
page, you can clear/refresh the following
information:
•
Total RX:
Displays the total packets received.
•
Valid RX:
Displays the amount of valid packets received.
•
Invalid RX:
Displays the amount of invalid packets received.
•
Other RX:
Displays the amount of other packets received.
•
Leave RX:
Displays the amount of leave packets received
•
Report RX:
Displays the amount of packet reports received
•
General Query RX:
Displays the amount of general query packets received
•
Special Group Query RX:
Displays the amount of special group query
packets received.
•
Special Group & Source Query RX:
Displays the amount of special group
and source query packets received.
•
Leave TX:
Displays the amount of leave packets transmitted.
•
Report TX:
Displays the amount of report packets transmitted.
•
General Query TX:
Displays the amount of general query packets
transmitted.
•
Special Group Query TX:
Displays the amount of special group query
packets transmitted.
•
Special Group & Source Query TX:
Displays the amount of special group
and source query packets transmitted.
