26
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Note:
Do not over-tighten the Screws. If you encounter re-
sistance while you’re tightening the Screws, stop tightening.
Failure to do so could result in damage to the monitor.
7.
Repeat steps 1 - 6 to mount the second
Monitor
.
Attaching the Monitors (Recessed)
Note:
It is recommend that two people are used to mount
the
Monitors
to the
Monitor Mounts
.
1.
Determine the size and length of screw to use to mount the
Monitors
to the
Monitor Mounts
(M4 x 12 mm or M5 x 12
mm, if appropriate).
2.
Lay the
Monitor
face down on a flat, level surface.
3.
Align the
Spacers
(x 4) with the
Screw Holes
on the back of
the
Monitor
.
4.
Align the
Mounting Holes
on the
VESA Mount
with the
Spacers
on the back of the
Monitor,
making sure that the
Mounting Flange
on the
VESA Mount
is at the top.
5.
Align the
Washers
(x 4) with the
Mounting Holes
on the
VESA Mount
.
6.
Insert the
Screws
(x 4) through the
Washers
and
Mounting
Holes
and into the
Screw Holes
in the back of the
Monitor
.