18
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Attaching the Column to the Base
1.
Position the
Base
on its side on a flat surface.
2.
Insert the bottom of the
Column
into the opening on the
top of the
Base
(the
Adjustment Lever
is located at the top
of the
Column
on the right side when facing the front of the
Base
).
3.
Align the 4
Center Screw Holes
on the bottom of the
Base
with the 4
Screw Holes
on the bottom of the
Column
.
Note:
When installing the
Column
, make sure that the
Cast-
ers
are on the opposite side of the
Base
.
4.
While supporting both the
Base
and the
Column
, insert the
4
M6 x 25 mm Hex Screws
through the
Screw Holes
on the
bottom of the
Base
(
Caster
side) and into the
Screw Holes
on the bottom of the
Column
.
5.
Use the
Hex Key
to tighten the 4
M6 x 25 mm Hex Screws
.
