Start italiana Digimon TFT, Installation Manual

Page: 4 / 24

Digimon TFT rev.01 2014/05 - ENG
4
DESCRIPTION
Console for monitoring level gauge and tanks alarm of 16 probe bus management, 2 sensors, 4 relays on the bus with outputs and
programmable events. Can be used with the most popular management system used in service stations.
Main feature
Supply
12-24VDC
Auxiliary supply Backup battery 9VDC 2014 Duracell
Consumption 0,75 VA
Number of probes 16
Output 4 RS232
Relay output capacity 4 relay low power MAX 12Vcc 2A
Serial comunication RS485
Host comunication RS232
Configuration RS232
Working temperature -20°C / +60°C
Relative humidity Da 5% a 95% (no humidity)
Protection IP66/68
Enclosure Painted metal
Dimension [mm] 165 x 145 x 120
CONNECTION BOARD
Follow these steps:
1. Open the top enclosure
2. Remove the 4 cross head screw using correct screw driver that fixes the CPU board
3. Lift the CPU board
WARNING: be carefull to not damage the flat-cable connection to the underneath DGM POWER board
4. Proceed connection following procedure procedere later in this handbook, connection summary
5. Use serial RS232 connection on CN4 with proper cable to program the console.