MODEL:
BTX-287
Congratulations, you are now the owner
of a brand new STARSPACE chair!
Following this assembly guide and you
will find a quick start guide to assemble
your STARSPACE chair. We highly
recommend checking out our Assembly
Videos as well for even more detailed
and visual instructions.
If you run into any difficulty during the
assembly, remember to check out the
Assembly Video to see if you've missed
anything. If you're unable to resolve your
problems, drop us an email as well and
our support team will assist you.
ASSEMBLY GUIDE
INSTRUCTION MANUAL
Back Cushion *1
Lift *1
Bolts 1/4*1” *10
Seat Cushion *1
Lift Cover *1
Bolts 1/4*7/8” *4
Arms *2
Star Base *1
Plastic Caps *8
Seat Plate *1
Casters *5
Wrench *1
1
5
9
2
6
10
3
7
11
4
8
12
PACKAGE LIST
ASSEMBLY INSTRUCTION
STEP 1:
STEP 5:
STEP 6:
STEP 7:
STEP 8:
STEP 2:
STEP 3:
STEP 4:
Contact us if you have
any issues
Mind the important
safety information
Having a friend to help
makes assembly
extra-easy
Scan this QR Code to watch our
assembly video for the chair.
Before you
get started,
a few
pointers:
Step 1:
Turn the Star Base(7) upside
down, then press the Casters(8) into
the holes at the end of each base leg,
insert the Lift(5) into the center hole of
the Star Base, the Lift Cover(6) should
be placed over the Lift.
Step 2:
Align the Seat Plate(4) over
the pre-drilled holes underneath the
Seat Cushion, make sure that the
front of the seat plate is facing the
front of the Seat Cushion. Attach the
Seat Plate(4) to the Seat Cushion
using TWO Botls 1/4*1”(9) at the
front and TWO Bolts 1/4*7/8”(10) at
the back, tighten all the bolts with the
Wrench(12), being careful not to miss-
thread the bolts or damaged the seat.
Step 3:
Turn the Seat Cushion
upright and align the center hole of the
Seat Plate(4) over the lift, then push
the Seat Cushion down onto the lift
firmly until the connection is secure.
Step 4:
Attach the Arms(3) to the
Seat Cushion(2) with Four Bolts
1/4*1”(9), using the Wrench(12).
Step 5:
Lay the Back Cushion on the
seat of the chair with the top of the
cushion toward the front. Attach the
Back Cushion(1) to the Arms(3) by
inserting Two Bolts 1/4*1”(9) in the
Lower holes with the Wrench(12).
Step 6:
Rotate the back of the chair
up, then secure it with the Top Two
Bolts 1/4*1”(9) with the Wrench(12).
Adjust the balance on each side of
the chair, and fully tighten all the bolts
at this step.
Step 7:
Align the control handles
of the back adjust over the pre-
drilled holes underneath the Seat
Cushion(2), attach the handle to
the Seat Cushion using Two Bolts
1/4*7/8”(10), tighten all the bolts with
the Wrench(12).
Step 8:
Press the Plastic Caps(11)
into the Arms holes to cover the bolts.
Note 1: Arm rests are labeled with an "L"
(left) or "R" (right) to show which sides
they should be placed on.
Note 1: Do not tighten all the bolts to
100%, make sure it have space to adjust
in the next steps.
Note 2: Do not tighten all the bolts to
100%, make sure it have space to adjust
in the next steps.
5
7
8
9
9
9
9
2
10
10
10
10
4
1
1
11
11
Make sure all bolts and screws are
fully tightened before using chair.
Lubricate all moving parts and tighten
all bolts/screws every 6 month or
whenever needed.
CAUTION:
+1 628-222-2513
www.starspacechair.com
6
3
SUBSCRIBE
STARSPACE CHAIR
Watch
video
9
