DataSure™
Operators Manual
36
PT 6*****
• Units Command:
Determines if the multiplexer will send the units of measurement with every
transmission.
This feature only works if the tool sends units of measurement as part of its message.
Example:
Transmitted Data
Received Data
U ON<cr>
M 01<cr>
U OFF<cr>
M 01<cr>
#01 00.0020 in
#01 00.0020
• Port Number Command:
Determines if the multiplexer will transmit the port number associated with every
received the reading.
Example:
Transmitted Data
Received Data
N ON<cr>
M 01<cr>
N OFF<cr>
M 01<cr>
#01 00.0020 in
00.0020 in
• Save Command:
This command will save the current setup of the virtual multiplexer. Every time the
network is stopped and restarted, the saved settings will be retained. Setups include the
ON or OFF status of Auto, Buzzer, Port Numbers, Poll, and Units modes. The Sequence
is also saved in the setup.
Example:
Transmitted Data
Received Data
SV<cr>
Save Complete
