Operation Guide
Whenever you want to drive a vehicle fit with an immobilizer, you
need to have it at hand. After a label arrives within the locking
module coverage area, they begin an automatic exchange of
codes via the radio link. Protection of the vehicle is performed by
locking its engine should a driving attempt be made in absence of
communication.
The engine locking is only engaged when the vehicle
performs a movement with its engine (ignition) on.
If a label is
not present within the reception area, the engine is on and the
vehicle doesn’t move, then
the locking is not performed
. This
allows using the immobilizer together with other systems of
automatic and remote engine start.
Locking algorithm
If, by the moment the vehicle begins moving, there still has been
no communication session (label not available/label battery
discharged), the system produces audible warnings of an expected
locking (depending on the selected protection mode (see page 23)
and settings), and the engine locking is started.
The engine locking is turned on for 20 seconds. If the vehicle
begins moving after the locking cycle has finished, the locking
turns on for another 20 seconds. If the locking is consequently
performed 3 times, the engine is locked until a label is brought
within the reception range.
21
